hello girls and boys! and matching benches, a table. what do you need? 4-6 2 long and wide boards the feet and then the of course, the stiffening the table top. how do you do the table? you can of course planed or buy polished boards, i buy
with more raw in the sawmill. and then planed, i.e. the outermost layer is removed, so that the beautiful wood comes to the fore with the wonderful and branches of the grain. after planing and a lot of wood shavings then the table or the boards is ground. thus, the surface is completely smooth. and if the surface is completely smooth
and done all ground2000:01:32,603 ??--> 00:01:35,250then you can paint it. previously but is usually in the table of raw once fully mounted and adjusted everything. and then when everything is ready all parts after the table was disassembled, painted, of course. not just once but a few times, that you may have years of enjoyment
and then when everything is dry put back together. my table here is a garden to table garden benches suitable, 2.06 meters long and 1.15 meters wide. so plenty of space to a clever to make barbecue! step 2: the lower bar is to there to hold the boards.
so that the screws do not look out we sink them with a wood cutter. or a large drill bit, is where you, drilled into them (the holes), the remaining hole to do then with an the outstanding ordinary drill and then you screw them. and so is the wooden board stable. and then here comes the mounting
for the feet. so people, as seen from the plate when it is mounted. both support beams and are now we then turn around and then you can grind them pretty well. why mounted the previously so if you are after then breaks it down a) can paint anywhere
and b) you can then go out and now above the surface yet so beautiful grind that there are no edges and are uneven and therefore it then looks as if it were a disk. and so the plate then looks from above. and of course, also has a beautiful area, barely a gap and is a wonderful make bbq table, barbecue table, garden table
then where easily have 8 people place for a little barbecue, barbecue feast. yes and after the table ground, so as rough areas like here then come away and be so smooth. almost as smooth as glass. and then when the undercarriage finished is the painting is nothing in the way. well, and then comes the difficult if you
would make the feet, and the folding mechanism. so you can fold it and then the table speak anywhere can set up a corner. this one has to measure exactly thus the inner foothold in turn in the outer leaves, completely. because nowhere else can you get it indeed stand up, or can not completely fold up to him.
but then he would stand on his feet. the frame would then not be deeper than if it just completely can rotate together, that is retractable. this is to gauge the difficulty of accurately it is also equal to the distance also on the length if he is of the table, so he is not wrong. and it's just right, he must be even shorter here, so he
can turn into here at the bar. and since you can properly measure and calculate. ;) so the frame is finished, that is, the feet where he is and you can also fold. and prevent the wood on ground in the wet is when it rains, yet it will come down steel plates with a bracket and the top has yet to take these blocks, the adjustment has to be made here.
so you can mount the swivel feet. and then the table is finished, then it is dismantled, ground (again), and then deleted reassembled! there are of course some things are still missing, here cut the curves, but these are just little things more. well here's feet, then the be screwed on to this and
8 mm strong steel is then the table. so that the wood is not in the water and is broken, then it stands to this metal feet. and which are still painted green to fit to the banks, because the bank frame is green. and of course the boards are properly ground, so they are nice and smooth and are no more rough spots.
when the ground is ready to be then deleted after the delete, not once but 2 or 3 times the table is then assembled and is ready. of course, only when the varnish has dried. because here you can see very rough spots through the grind and are completely smooth. and those are exactly the things that
to do when it rains again forever! and because you can not moped driving, comes the idea to build a table. so the last operation, underline. with a very good seal. so that the wood is not attacked and is nice and smooth. then grind in between short, emphasize once more polish, which is the
penultimate step and the last is assemble the table and his to bring destination. and the table is ready! with metal feet so that he is not standing on the ground in the wet.